Skip to main content

Facility Operations Reports: Lease Vehicle Information Report

Look up the vehicles your tenants have on file at this facility, with the tenant, unit, and lease tied to each one.

Overview

The Lease Vehicle Information report gathers vehicles recorded against active tenant leases at a single facility.

Every row pairs a vehicle with the tenant and unit it belongs to and lays out the vehicle's particulars - type, year, make, model, color, and VIN - together with plate details, insurance details, any lienholder, and any staff note.

Managers use this report to check a tenant's vehicle at their own location, verify insurance or lienholder details, or track down a vehicle by its plate or VIN.

Prerequisites

Running this report for a single facility requires:

  • The Read Vehicle (Report) permission at the Facility level.

Report Scope

This article covers the facility-level version of the Lease Vehicle Information report, scoped to the one facility currently selected. To pull the same vehicle records across several facilities at once, use the Lease Vehicle Information Report corporate version.

Report Layout

The report page shows a set of identifying parameters at the top, and a download option.

Report Parameters

These items tell you what the report is and how fresh the data is:

  • Report name and category – the heading Lease Vehicle Information, sitting beside the orange Operations badge that identifies its report group.

  • Facility scope – the single facility the report was run for, shown beneath the title. Because the report is limited to one facility, the results do not include a facility column.

  • Report generated timestamp – the moment the report ran, labeled Report Generated, which tells you how up to date the results are.

    The Lease Vehicle Information report heading with the Operations badge, the selected facility, and the Report Generated date and time.

    The top of the Lease Vehicle Information report, showing the report title, Operations badge, selected facility, and generation timestamp.

ℹ️ Info: No start or end date is chosen for this report. Each run captures the vehicle records that are on file at the Report Generated moment, so the results are a snapshot rather than a range.

  • Export as – The export option sits on the right side of the report page. It saves the report in CSV, Excel, or PDF form.

    The Export as menu open, showing CSV, Excel, and PDF download options.

    The Export as menu opened, listing CSV, Excel, and PDF download options.

Main Table Content

The results table carries these columns, from left to right:

  • Tenant – The person or company named on the lease. The name opens the tenant's record.

  • Unit – The unit this lease covers, and where the vehicle details are held. The unit opens the unit's record.

  • Move-In Date – The day the tenant moved in under this lease.

  • PTD – The date the lease is paid through.

  • Vehicle Type – The category of vehicle on file, for instance, Car or Truck.

  • Year – The model year of the vehicle.

  • Make – The company that built the vehicle, for instance, Toyota or Chevrolet.

  • Model – The specific model, for instance, RAV4 or Camaro.

  • Color – The color of the vehicle.

  • VIN – The vehicle identification number.

  • #Plate – The license plate number on the vehicle.

  • Plate State – The state that issued the license plate.

  • Ins Company – The insurer recorded for the vehicle.

  • Ins Policy – The number of the insurance policy.

  • Ins Expiration Date – The day the insurance policy runs out.

  • Non-Op Registration – Whether the vehicle carries a non-operational registration, marked Yes or No.

  • Lienholder Name – The party holding a lien on the vehicle, such as an auto finance company.

  • Lienholder Address – The lienholder's mailing address.

  • Lienholder Phone – The lienholder's contact number.

  • Note – Any free-text remark staff have entered about the vehicle, such as a known fault.

    The report results table with Tenant, Unit, and vehicle detail columns, one row per lease.

    The Lease Vehicle Information results table, with one row per lease showing each vehicle's tenant, unit, and details.

ℹ️ Info: This report lists active leases only. A lease whose move-in has been cancelled is left out, even when a vehicle is on file for it.

ℹ️ Info: A lease can carry one vehicle, so the report prints one line per lease. A tenant who has recorded a vehicle on two separate leases turns up on two lines - one line for each lease.

FAQ

Questions facility staff raise about this report:

  1. A tenant is listed twice - is that a mistake?

    No. Each vehicle is attached to a single lease, not to the tenant overall. A tenant who holds two leases and has a vehicle on each will show one line per lease, so the same name can appear more than once.

  2. Will the report refresh by itself after I run it?

    No. What you see reflects the vehicle records on file at the Report Generated time. Run the report again to pick up any changes made afterward.

  3. Some lines have no vehicle details - why?

    Depending on your facility's field settings, vehicle fields can be optional, so a record can be saved with few or none of them filled in. Such a record still shows as a line, with the blank fields empty and Non-Op Registration set to its default of No.

  4. How does a vehicle end up on this report?

    Vehicle information reaches this report in three ways:

    • A staff member records it through the Add Vehicle Information window on the tenant's unit.

    • A tenant enters it during an online move-in in the tenant portal.

    • It arrives with the lease when leases are imported into QuikStor, such as during a migration.

Did this answer your question?