Overview
The Coverage Roll report lists every active lease across one or more selected facilities, showing whether each lease is protected by a facility plan, by the tenant's own private insurance, or not covered at all, as of a chosen date. You can oversee multiple facilities by running the report to see uninsured exposure company-wide, and to get a single set of coverage, premium, and status totals across every site selected. Because the report is a point-in-time snapshot, it also answers "what did coverage look like on this date" even if coverage records have since changed.
Prerequisites
Access to this report requires:
You are logged in to QuikStor.
The Read Coverage Roll permission, in the Report section, at the Corporate tab.
Key Terms and Rules
The Coverage Roll report is built around a small set of terms and rules that apply across the summary and the main table. They're defined once here rather than repeated in each section.
Key Terms
Facility plan – A protection plan sold by the facility and attached to the lease, carrying a coverage amount (the protected value, for example $2,000) and a premium (what the tenant pays, typically monthly). If a facility plan was attached to the lease and was still active on the as-of date, then the lease is reported with Facility plan status, and this always takes priority over any private coverage the tenant also has on file - that private coverage is not shown on the row, so no tenant is ever counted twice. If a facility plan was cancelled before the as-of date, then it does not count, and the lease is reported as None instead.
Private Coverage Active – Coverage a tenant arranged independently, after declining the facility plan, using their own homeowner's or renter's insurance policy. This status applies only when the lease has no facility plan, and only when the policy's expiration date is on or after the as-of date (a policy expiring exactly on the as-of date still counts as active). The report tracks only the policy's expiration date.
Private Coverage Expired – The same kind of independently arranged insurance policy as Private coverage Active, but with an expiration date that has already passed as of the as-of date. This status applies only when the lease has no facility plan.
None – No facility plan is attached to the lease, and no private coverage - active or expired - is on file. A lease in this state represents uninsured exposure for that tenant.
Formatting Rules
Figures on this report are displayed consistently using the following rules:
Money – Always shown with two decimals and a dollar sign, for example $1,234.56.
Counts – Counts are shown as plain numbers.
Report Scope
This article covers the Corporate level version of the Coverage Roll report, which spans one or more selected facilities as a single flat roll. Its summary states the total number of coverages available, how many fall into each coverage status, and the total coverage and total premium across every selected facility.
The report is always run for a single as-of date, not a date range - this is deliberate, since the report is a point-in-time snapshot rather than an activity log over a period.
If a report is run for a past as-of date, then it reproduces coverage exactly as it stood on that date, even if coverage records have since been changed or deleted - the report is fully historical.
Because a single report run can span facilities in different time zones, each facility is evaluated as of 23:59:59 on the as-of date in that facility's own local time zone, not a single company-wide time.
Lease Scope on the as-of Date
A lease appears on the report if, on the as-of date, the tenant had already moved in, had not yet moved out, and the move-in itself was never reversed.
If the tenant moves out on the as-of date itself, then the lease still counts as present for that report run.
If a move-in was later reversed, then the lease never appears on the report for any as-of date - reversed move-ins are invisible to this report entirely.
💡 Tip: The report can also be scheduled for recurring email delivery. It can also be marked as a favorite report for easier and quicker access.
Report Layout
The report page includes report parameters, page controls, summary, and the main table section. The parameters, controls, and the summary section are covered below; the main table is documented in its own section Main Table Content below.
Report Parameters
Report name and category – Shown as Coverage Roll, tagged with the orange Operations badge.
Facility scope – One or more facilities and/or facility groups, selected before the report is run. If the same facility is included through more than one selection - for example, directly and also as part of a selected facility group - it is still counted only once; overlapping selections are combined and duplicates are removed.
Date range – The Generated For date the report was run for. The Coverage Roll report always uses a single date, never a From/To range.
Report Generated timestamp – The exact date and time the report was run.
Report parameters on the Corporate level Coverage Roll report displaying report name, category, facility scope, date range and Report Generated timestamp
Filters and Export
Coverage Status filter – Isolates leases by one of the five statuses (All, Facility plan, Private Coverage Active, Private Coverage Expired, None).
Coverage Status filter showing All, Facility Plan, Private Coverage Active, Private Coverage Expired, and None options
Filter – Opens the Generate Coverage Roll Report drawer, where the For date can be reapplied. Since this report is Corporate level, there is a facility and facility group picker in this drawer.
Selecting a report date, typing in the facility name and generating the Coverage Roll report in the Generate Coverage Roll Report drawer
Export as – Downloads the report as CSV, Excel, or PDF.
Export as button on the report page displaying CSV, Excel, and PDF as download options
💡 Tip: Use the Coverage Status filter to isolate leases with Private Coverage Expired or None status when building a follow-up list for uncovered or lapsed tenants.
Summary Section
A single grand-total block sits at the top of the report: total lease count, the four status counts (which always add up to the lease count), total coverage, and total premium. There are no per-facility subtotals and the penetration KPIs (Covered %, Average Premium) exist only on the Facility level.
Coverage Available – The total number of active leases across every selected facility, as of the as-of date.
Facility Plan Count – The number of those leases with Facility plan status.
Total Private Coverage – The number of those leases with Private Coverage Active status.
Private Coverage Expired – The number of those leases with Private Coverage Expired status.
No Coverage Count – The number of those leases with None status.
Total Coverage – The sum of the coverage amount across facility-plan leases only, company-wide. Private policy coverage amounts are not tracked by this report and are not included.
Total Premium – The sum of the premium across every facility-plan lease, company-wide.
Summary section of the Coverage Roll report
ℹ️ Info: The four status counts - Facility Plan Count, Total Private Coverage, Private Coverage Expired, and No Coverage Count - always add up to Total lease count, or Coverage Available summary card.
Main Table Content
The report has a single results table, listing one row per active lease across every selected facility.
Facility – The name of the facility the lease belongs to. This value is clickable and opens that facility's Dashboard.
Tenant – The tenant name on the lease, as it read on the as-of date. This value is clickable and opens that tenant's overview tab.
Unit – The unit number tied to the lease, as it read on the as-of date. This value is clickable and opens that unit's overview tab.
Coverage – The name of the facility plan attached to the lease. Blank if the lease has no facility plan.
Coverage Status – One of four values for this lease as of the as-of date: Facility Plan, if an active facility plan is attached (this always takes priority over any private coverage on file); Private Coverage Active, if there's no facility plan and the tenant's private policy has not yet expired; Private Coverage Expired, if there's no facility plan and the tenant's private policy's expiration date has passed; or None, if there's no facility plan and no private coverage - active or expired - on file at all.
Private Coverage Exp. Date – The expiration date of the tenant's private insurance policy. Shown only on rows with Private Coverage Active or Private Coverage Expired status; blank on every other row.
Main table of the Corporate Coverage Roll report showing Facility, Tenant, Unit, Coverage, Coverage Status, and Private Coverage Exp. Date columns
ℹ️ Info: This table does not show a per-lease coverage amount or premium. Those figures are reported only as company-wide totals, in the summary above - not broken out row by row.
Good to Know
Private coverage status follows the tenant, not the unit. A tenant who leases several units - even across different facilities - shows the same private-coverage status on every one of those leases.
Removing proof of insurance from a lease is recorded, not erased. The lease correctly reads as uncovered afterward - unless the tenant has a second, still-valid policy on file, in which case the report falls back to that policy.
Facility, tenant, and unit values on this report are historical. If a tenant is later renamed or a unit later renumbered, a report re-run for a past as-of date still shows the value as it read on that date.
If a report is run with an empty facility or facility group selection, it returns an empty report with all totals at zero, not an error.
FAQ
The following questions cover common points of confusion when reading the Coverage Roll report at the Corporate level.
1. Does this report show an attachment rate or penetration percentage, like the Facility version does?
No. The Corporate version reports company-wide totals only - Coverage Available, the four status counts, Total Coverage, and Total Premium. Covered % and Average Premium are unit-based figures that exist only on the Facility level version.
2. Can I see coverage totals broken out per facility instead of one company-wide total?
Not directly on the report. Every figure in the summary is a single total across all selected facilities, with no per-facility subtotals. A per-facility breakdown has to be built separately, for example by exporting the report and subtotaling it in a spreadsheet.
3. If I select a facility directly and also select a facility group that includes it, does that facility get counted twice?
No. Overlapping facility selections are combined, and any facility included more than once is still counted only once in the report.
4. If my selected facilities are in different time zones, which time zone is used for the as-of date?
Each facility is evaluated as of 23:59:59 on the as-of date in that facility's own local time zone, not a single company-wide time zone.
5. Does a cancelled protection plan still count as coverage?
No. If a facility plan was cancelled before the as-of date, the lease reads as None for that report run, regardless of when the plan was originally attached.
6. Can this report be run for a date range instead of a single date?
No. The Coverage Roll report always uses a single as-of date. It's a point-in-time snapshot, not an activity report over a period, so there is no date-range option.
Related Reports






