Overview
The Site Access Integrations page connects QuikStor to the outside systems that control your gates and unit locks. By the end, your facility is linked to a gate control system and a unit lock system, and - for DigiGate - your access hours and unit zones are mapped so the gate knows when and where each tenant can go.
You do not enter any passwords or keys here; you only pick the systems. This setup does not create access hours or zones; it links the ones you already have.
Prerequisites
Before you start, make sure you have the following:
You are logged in to QuikStor with your email credentials.
The Facility Switcher is set to the facility you want to set up.
At least one Access Hours Group is set up at this facility.
The facility has units assigned to an Access Zones Group.
For DigiGate: the time zones and keypad zones are already set up in your DigiGate system, so you know their ID numbers (0 to 63).
The Read (Site Access Configuration) facility permission is enabled for your role.
Step 1: Open Site Access Control
Site Access Control holds the integration settings, and you can reach it from the left menu.
In the left menu, click Site Access.
In the submenu, click Site Access Control. The Access Hours Groups tab opens by default.
The Sidebar with the Site Access menu expanded to show the Site Access Control submenu item.
Step 2: Open the Site Access Integrations Tab
The integration settings are on the Site Access Integrations tab, not on the default tab.
Click the Site Access Integrations tab. The Site Access Integrations page opens.
The Site Access Integrations tab with Gate Control Integration and Unit Lock Integration both set to None before setup.
Step 3: Select the Gate and Unit Lock Systems
On this page, you choose which outside systems control your gates and your unit locks.
Click Update Integration. The Edit Site Access Integrations drawer opens.
The Site Access Integrations page with the Update Integration button, before any gate or lock system is selected.
Open the Gate Control Integration list and select your gate control system, for example, DigiGate.
Open the Unit Lock Integration list and select your unit lock system, for example Noké Smart Entry. If the facility has no smart locks, select None.
Click Save Site Access Integrations.
The Edit Site Access Integrations drawer with DigiGate and Noké Smart Entry selected.
ℹ️ Info: When you select DigiGate, the DigiGate Mappings section appears on the page, with Gate Time Zones and Keypad Zones to set up. Other gate systems do not use these mappings.
Step 4: Add a Gate Time Zone Mapping
A Gate Time Zone is a schedule set up in your DigiGate system that controls when a tenant can enter and leave. This mapping links one Access Hours Group to that DigiGate time zone by its ID.
In the Gate Time Zones section, click Create New.
Select Create New Manually. The Create DigiGate Gate Time Zone Mapping drawer opens.
The Gate Time Zones section with the Create New menu open, showing Create New Manually and Create New via CSV.
Open the Access Hours Group list and choose the access hours group to map.
In Gate Time Zone ID, enter the DigiGate time zone number, from 0 to 63.
Click Create DigiGate Gate Time Zone Mapping.
The Create DigiGate Gate Time Zone Mapping drawer with an access hours group chosen and a Gate Time Zone ID entered.
⚠️ Warning: The Gate Time Zone ID must match a time zone that already exists in your DigiGate system. It accepts a whole number from 0 to 63. A higher number shows the message “Gate Time Zone ID must be between 0 and 63” and is not saved.
Step 5: Add a Keypad Zone Mapping
A Keypad Zone is a group of gates or keypads set up in your DigiGate system that a tenant is allowed to use. This mapping links one or more Access Zones Groups to that DigiGate keypad zone by its ID.
In the Keypad Zones section, click Create New.
Select Create New Manually. The Create DigiGate Keypad Zone Mapping drawer opens.
The Keypad Zones section with the Create New menu open, showing Create New Manually and Create New via CSV.
Open the Access Zones Groups list and select the zone or zones that hold your units.
In Keypad Zone ID, enter the DigiGate keypad zone number, from 0 to 63.
Click Create DigiGate Keypad Zone Mapping.
The Create DigiGate Keypad Zone Mapping drawer with an access zones group selected and a Keypad Zone ID entered.
💡 Tip: To add many mappings at once, use Create New via CSV instead of Create New Manually in either section, and upload a file (CSV means comma-separated values).
Done! Your facility is now linked to its gate and unit lock systems, and your access hours and unit zones are mapped to DigiGate. Tenants in the mapped zones get gate and keypad access based on the access hours you linked.








