Overview
Move-In places a tenant into a storage unit at a facility. Facility staff use it to turn a vacant unit into a rented one across four screens, taken in order: Tenant Information, Financial, Signature, and Payment.
Each screen has required fields that must be filled before the process can move on, and while a Move-In is in progress, the unit is held as a draft at the Unavailable status.
This article explains what each screen does, what to provide to move forward, and what can stop the process from finishing.
Key Concepts
These definitions help you read the article without guessing.
Move-In draft: a Move-In that you have started but not yet finished. The draft holds the unit so no one else can rent it while you work.
Static section: a part of a screen that is always shown. A static section appears as soon as a screen opens, whether or not you have entered anything.
Dynamic section: a part of a screen that appears only after a condition is met. A dynamic section is hidden until you complete an action, and then it shows up and updates on its own.
Billing Period: a billing pattern set for a unit during Unit Setup. A unit is billed either by month (shown as Month or Monthly) or by a custom period (shown as Period or Periods). The type decides which options you see in the Billing Period field on the Financial screen.
Unit status: a unit state, shown as a short code. VAC means Vacant (empty and available), UNA means Unavailable (held, for example during a Move-In), and a unit can also be Reserved (held by a reservation). A Move-In changes a unit to Unavailable, and it returns to Vacant or Reserved when the Move-In is discarded.
Field Settings: a facility setting that decides which tenant fields are required during Move-In. It can make more fields required than the single First Name field.
Approaching the Feature
Move-In is available at the Facility level, where facility staff rent out units that belong to that facility. This section explains where a Move-In begins – the unit it starts from – and the two conditions that control the Move-In button, so it is clear in advance why the button is sometimes available and sometimes not.
Selecting a Vacant Unit
A Move-In always starts from a single vacant unit, chosen on the List of All Units screen. This screen is the facility’s central view of its units, reached from Units in the Sidebar, and it shows every unit with its status – including the vacant ones, labeled VAC.
List of All Units screen opened from Units in the Sidebar.
Clicking the Unit Number of the selected Unit opens its Unit Overview. The Unit Overview screen shows the Move-In button. Clicking the button starts the Move-In process for that unit and opens the first screen, Tenant Information.
Unit Overview screen and Move-In button in the upper-right corner.
Minimum Permissions (To Start)
The Move-In button located in the upper-right corner of the Unit Overview screen is the gateway to starting a new lease.
Before you can even see or click the Move-In button, two conditions must be met. If these are missing, the button will either be completely hidden or greyed out.
Move-In (Lease) Permission: A facility-level permission that grants the visibility of the Move-In button on the Unit Overview page.
Unit Setup Configuration: The unit must be in a "ready" state. Even with the correct permissions, the button will remain greyed out (unclickable) if the unit is not properly configured.
How Does the Move-In Process Work
The Move-In process moves a tenant into a unit across four screens, taken in order: Tenant Information, Financial, Signature, and Payment.
Tenant Information collects the tenant's details, Financial builds the first invoice and sets the billing terms, Signature handles the lease signature, and Payment takes the first payment and completes the Move-In.
Throughout the flow, the Move-In is held as a draft, and the unit's status is set to Unavailable while the procedure runs. This stops a second Move-In from starting on the same unit at the same time. A draft can be discarded before the process is finished, which releases the unit.
Using the Feature
Every Move-In screen shares the same fixed sections around the edges and has its own content in the middle. The fixed sections are described first, then each screen in turn.
Move-In Stage Tabs
Move-In Stage Tabs run across the top of every Move-In screen and show which stage is open. The bar lists every stage of the Move-In process.
Each tab has two parts:
Stage Tab Name - a stage name, such as "Tenant Information".
Stage Tab Action - describes an action for a particular stage, such as "Fill tenant details". It sits below a tab name.
An active tab has a blue border on the bottom, and it marks the screen that is open right now.
Move-In Stage Tabs: Tenant Information, Financial, Signature, and Payment.
Move-In Header
Move-In Header sits below the Move-In Stage Tabs section and names the unit being moved into. The header has the following components:
Back to [previous screen] - The button sends you to the previous screen.
Title - the window title in the form [Unit Number] Move-In, for example, A13 Move-In.
Unit Group - the Unit Group that the unit belongs to.
Search for Prospect or Tenants - The input field searches for prospects and tenants.
Send Move-In Link - The button sends a Move-In link to prospects and tenants.
Move-In Header showing Back to, Title, Unit Group, Search for Prospect or Tenants, and Move-In Link.
Move-In Footer
Move-In Footer is a blue bar positioned at the bottom of every Move-In screen. It contains:
Back to [previous screen] button - sends you to the previous screen.
Next to [following screen] button - sends you to the next screen.
Discard Move-In Process button - It discards the Move-In process. Once clicked, it opens a modal titled "Are you sure you want to discard Move-In Draft?". The modal offers Discard Draft and Cancel buttons. It appears on the Financial stage tab.
Skip - It appears on the Signature screen and allows you to skip the Signature configuration.
Total Payments and Paid-Through paragraphs - appear as text on the Payment screen. Total Payments shows how much the tenant needs to pay, and Paid-Through shows the date the rent is paid through, so you can see how much is due and when.
Move-In Footer, fixed to the bottom of every Move-In screen.
Tenant Information screen with three fixed sections: Move-In Stage Tabs, Move-In Header, and Move-In Footer.
ℹ️ Info: On the Signature screen, the navigation footer shows an extra Skip option. Skip lets facility staff pass the Signature screen without setting up a signature. The lease can be signed later.
⚠️ Warning: Discarding a Move-In draft cannot be undone. The started Move-In is removed, and the unit returns to Vacant, or to Reserved if the Move-In started from a reservation. A draft cannot be discarded once a Move-In payment has been submitted.
Tenant Information
Tenant Information is the first screen you see after clicking the Move-In button on the Unit Overview. It collects information about the tenant who is renting a unit.
Tenant Information screen has four sections:
Basic Information – the tenant’s name and contact details.
Tenant’s Address – the tenant’s postal address and photos of their ID.
Driver’s License – license details, plus optional records: alternate contact, military profile, vehicle, and lien property.
Lease Information – the value and description of the stored goods.
Tenant Information screen and its four sections: Basic Information, Tenant’s Address, Driver’s License, and Lease Information.
ℹ️ Info: Which fields are required on this screen comes from the facility's Field Settings. A facility can make more fields required than the single First Name field named here, including the alternate contact.
Basic Information
Basic Information section holds the tenant's name and contact details.
Gender: dropdown. Selects the tenant’s gender from a set list.
First Name: text field. The tenant’s first name. By default, required – the process cannot continue to the next screen without it.
Last Name: text field. The tenant’s last name.
Email Address: text field for an email address.
Primary Phone Number: phone number field with a country-code selector. The tenant’s main phone number.
Secondary Phone Number: phone number field with a country-code selector. A backup phone number.
Date of Birth: date field. The tenant’s date of birth.
Company Name: text field. The company name, when the unit is rented to a business.
Basic Information section fields.
Tenant's Address
Tenant's Address section holds the tenant's postal address and photos of their ID.
Address 1: text field. The tenant's main street address.
Address 2: text field. The tenant's second address.
City: text field. The city.
Country: text field. The country.
State: text field. The state or region.
Postal Code: text field. The postal or ZIP code.
Identification Front Side: file upload. The front of the tenant's ID document. Files can be added or dragged and dropped.
Identification Back Side: file upload. The back of the tenant's ID document.
Tenant's Address section fields.
Driver's License
Driver's License section holds the tenant's license details and a set of extra records you can add.
License Number: text field. The driver's license number.
License State: text field. The state that issued the license.
License Expiration Date: date field. The date the license expires.
This section has four records that start empty and open a drawer from the right side of the screen when you add them:
Alternate Contact: shown as No Alternate Contact Added with an Add button. Adds a contact who receives legal documents if the tenant does not respond.
Military Profile: shown as No Military Profile Added with an Add button. Adds a military profile for extra benefits.
Vehicle Information: an Add action. Records any vehicles stored on the facility grounds or in the unit.
Other Lien Property: an Add action. Records extra lien property details and notes.
Driver's License section fields.
Lease Information
Lease Information section describes goods the tenant plans to store.
Estimated value of stored goods: currency field in USD. The tenant's estimate of what the stored goods are worth.
Description of stored goods: text box. A free-text description of stored goods.
Lease Information section fields.
Financial
Financial is the second screen of the Move-In process. It builds the first invoice for the tenant and sets the billing terms for the lease.
The Financial screen has three sections:
Invoice Setup – sets the billing terms and builds the first invoice.
Max Rent Increase – sets a limit on how much rent can rise and over how many months.
Charges Overview – the calculated invoice: every charge and the Grand Total the tenant pays.
Invoice Setup and Max Rent Increase are static sections, so they are shown as soon as the screen opens. Charges Overview is a dynamic section that appears only after the invoice is calculated.
Financial screen after the invoice is calculated, with Invoice Setup, Max Rent Increase, and Charges Overview sections.
Invoice Setup
Invoice Setup holds fields that set billing terms and invoice. Billing Period and Lead Source fields are required, so the invoice cannot be calculated without them.
Billing Period: dropdown. Required. Sets how long the first billing period is. The options depend on the set Unit Billing Cycle:
Unit billed by month shows Month or Monthly values (such as Pro-Rate Only, 1 Month, 2 Months).
Unit billed by a custom period shows Period or Periods values (such as Pro-Rate Only, 1 Period, 2 Periods). After the invoice is calculated, this field also shows the Paid Through Date as PTD.
Apply Coupon Code: text field with an Apply action. Enters a coupon code to discount the invoice.
Available Specials: dropdown. Selects a promotion offered for the unit, such as 50% off 3 months. The special needs to be created at the Corporate level and assigned to the facility.
Lead Source: dropdown. Required. Records where the tenant came from, such as Google AdWords, Friend/Relative, or other.
Coverage: a dropdown. Adds a protection plan to the lease, such as $1,000 coverage. The coverage plans need to be created at the Corporate level and assigned to the facility.
Calculate Invoice: button. Builds the invoice from the fields above and opens the Charges Overview section.
Invoice Setup section sets billing terms. Billing Period and Lead Source are required to calculate the invoice.
Max Rent Increase
Max Rent Increase sets a cap on how much the rent can rise and over what period. It is a static section, shown whether or not the invoice is calculated.
Number of Months: dropdown. The number of months the cap applies over, such as 12 Months.
Percentage: number field. The highest percentage the rent can increase by.
Max Rent Increase section sets how much the rent can rise and over how many months.
Charges Overview
Charges Overview is a dynamic section. It appears only after the required fields in Invoice Setup are filled and the Calculate Invoice button is pressed. Once it appears, the Calculate Invoice button disappears, and any change in Invoice Setup updates Charges Overview on its own.
Charges Overview Heading
The heading runs across the top of the Charges Overview section. On the left is the Charges Overview name followed by its description. On the right is the Street Rate/Web Rate switcher.
Title and description - the title names the section, and the description below it reads "All fees, discounts, and items are reflected in the totals below."
Street Rate / Web Rate - a toggle. Switches charges between the street rate and web rate.
Charges Overview Table
The table shows one line for each charge. Each line shows:
Quantity - the number of that line item, shown in the QTY column. It is 1 for most Move-In charges.
Line Item - the charge name on that row, such as Pro Rate, Rent, or coverage name. It names what is being billed.
Unit - the unit the charge belongs to, shown as a Unit Number, such as #A12.
Dates - the period the charge covers. The Pro Rate line covers the days left in the current month, and the Rent line covers the first full month.
Item Price - the price for a single unit of the line item. For Rent and Pro Rate, it is an editable field, so the amount can be adjusted before the invoice is finished.
Total Price - the amount for the whole line, after the item price and quantity are applied. All Total Price values add up to the Grand Total.
Below the line items is the Grand Total Row:
Grand Total Row - the green bar below the line items. It shows the Grand Total (the sum of every line, which is the amount the tenant pays for the cycle) in the Total Price column, and holds two buttons:
Add Items - opens a drawer on the right side for adding an item line to the invoice.
Add Fees - opens a drawer on the right side for adding a fee line to the invoice.
Charges Overview table, listing each charge - Pro-rate, Rent, Coverage, and discounts - with the Grand Total the tenant pays for the cycle.
Signature
Signature is the third screen of the Move-In process. It handles how the lease is signed. The screen offers four ways to sign, each in its own section: Print & Sign, Generate Code, Send Email, and Send SMS. Only one method is used for a given Move-In.
Signature screen with four signing methods: Print & Sign, Generate Code, Send Email, and Send SMS.
Print & Sign
Print & Sign is for signing the lease on paper, outside the system. The system does not ask for any code or token, and a paper signature is always treated as valid.
The section includes a Preview and Download Lease link to view and print the lease, and an upload area where the signed document is added back. Files can be dropped or browsed, and the supported formats are jpg, jpeg, jfif, png, webp, avif, heic, and pdf.
Print & Sign section, with the Preview and Download Lease link and the upload area for adding the signed document back.
Generate Code
Generate Code creates a six-character code for the signature request, used within the QuikStor Sign application. Staff or the tenant enter the code in the QuikStor Sign application, view the lease as a PDF, type their full name, and confirm the signature.
The code works only while the request is pending; once the lease is signed or the request is canceled, the same code cannot be used again.
Generate Code section, showing a six-character code.
Send Email
Send Email emails the tenant a link to sign the lease document. The tenant opens the link and signs on the same form, without logging in. This method is for lease documents.
When Send Email is selected, QuikStor sends the email to the address saved for the tenant on the Tenant Information screen. The section then shows the line "An email will be sent to:" with that address, together with a Resend button that sends the email again if the tenant did not receive it.
Send Email section, showing an email address the link is sent to and a Resend button.
Send SMS
Send SMS works the same way as Send Email, but the tenant receives the link by text message instead of email.
When Send SMS is selected, QuikStor sends the text to the phone number saved for the tenant on the Tenant Information screen. The section then shows the line "An sms will be sent to:" with that number, together with a Resend button that sends the text again.
Send SMS section, showing a phone number the link is sent to and a Resend button.
ℹ️ Info: Send Email is grayed out when the tenant has no email address. Add an email address on the Tenant Information screen to enable it.
ℹ️ Info: Send SMS is grayed out when the tenant has no phone number, or when no SMS signature template is assigned to the facility. Add a phone number on the Tenant Information screen, then create an SMS Signature template at the Corporate level and assign it to the facility.
Payment
Payment is the fourth and final screen of the Move-In process. It is where the first payment is taken, and the Move-In is completed.
At this point, the Move-In Footer shows Total Payment due, Paid-Through date, and the Complete Move-In button finishes the process once the payment is entered.
The Payment screen has two sections:
Payment Tabs – payment methods enabled for the facility; the selected one updates Payment Information.
Payment Information – the fields to fill for the selected method; changes with the chosen tab.
Payment screen sections: Payment Tabs and Payment Information.
Payment Tabs
Payment Tabs is a static section that is always shown at the top of the Payment screen. It lists the payment methods enabled for the facility, such as Credit Card, Cash, ACH, and Check. An active method shows a blue line below its name and updates the Payment Information section.
Payment Tabs - Credit Card, Cash, ACH, and Check with a selected method underlined in blue and its fields shown below.
Payment Information
Payment Information is a dynamic section that appears below the Payment Tabs section. Its content changes with the selected payment tab. Each method opens with a short instruction telling the facility staff what to do, followed by the fields that staff fill in.
Credit Card
The instruction reads "To complete your purchase, please provide your credit card details below." The tab has two groups of fields, plus two toggles.
Credit Card Information
Card Number: text field, required. The card number.
Cardholder Name: text field, required. The name on the card.
Expiration Date: two dropdowns, Month and Year, required. The date the card expires.
CVV: text field, required. The security code on the card.
Billing Information
First Name: text field, required.
Last Name: text field, required.
Address: location field, required. A location search helps find and fill the address.
City: text field, required.
Country: dropdown, required.
Postal Code: text field, required.
Two toggles sit below the fields:
Set as Auto Billing: toggle. Uses this card to bill the tenant automatically each cycle.
Save as Payment Method: toggle. Saves this card on the tenant for future payments.
Credit Card method with Credit Card Information and Billing Information fields, and Set as Auto Billing and Save as Payment Method toggles.
Cash
The instruction reads "To complete your purchase, please provide the cash amount below. If the cash provided is more than the required amount, the change can be added to the balance."
Cash Amount: currency field, required. The amount of cash taken from the tenant.
When the amount entered is below the total due, a message shows the minimum allowed amount and how much is still missing.
Cash method shows one input field and a message that warns when the amount is below the total due.
ACH
The instruction reads "To complete your purchase, please provide your bank account details below." The ACH tab takes payment as a bank transfer and has two groups of fields, plus two toggles.
Bank Account Information
Account Holder Name: text field, required. The name on the bank account.
Routing Number: text field, required. The bank's routing number.
Account Number: text field, required. The bank account number.
Billing Information: the same six fields as the Credit Card tab - First Name, Last Name, Address, City, Country, and Postal Code - all required. The same two toggles appear below: Set as Auto Billing and Save as Payment Method.
ACH method, which takes a bank transfer using the account details and the same billing fields as Credit Card.
Check
The instruction reads "To complete your purchase, please provide the check details below."
Check Number: text field, required. The number on the check.
Check Amount: currency field, required. The amount on the check.
When the amount entered is below the total due, a message shows the minimum allowed amount and how much is still missing.
FAQ
These are the most commonly asked questions about the Move-In process.
1. Why is the Move-In button missing or grayed out?
The Move-In button depends on two things. If you do not have the Move-In (Lease) permission, the button does not appear at all. If you have the permission but the unit's setup is not complete, the button appears but is grayed out, so you can see it but cannot click it.
The button works only when you have permission and Unit Setup is complete. See Enable a Unit for Move-In for the setup steps.
2. Why is the Move-In process stuck on the current screen?
A Move-In cannot move forward when a required field is empty. On Tenant Information, First Name is required, and the facility's Field Settings can require even more fields, including the alternate contact.
On Financial, Billing Period and Lead Source are required. A pending signature or a unit that is not set up for Move-In can also stop you from finishing.
3. Can the Signature screen be skipped?
Yes. On the Signature screen, the navigation footer shows a Skip option, so facility staff can pass this screen and sign the lease later. However, when a unit has no lease document to sign, the step is skipped on its own, without asking you to confirm.
4. What happens to a unit while a Move-In is in progress?
A started Move-In is held as a draft, and the unit's status is set to Unavailable, so no one else can rent it. A second Move-In on the same unit is blocked while the draft is open, with the message "Move-in draft already exists for this unit.", and Undo Move-In and Undo Move-Out on that unit are blocked too.
5. Does a Move-In draft stay open, or is it cleared after a while?
An unfinished draft does not stay open forever - how it clears depends on how it was started. A draft started from the Tenant portal (online move-in) is cleared automatically after 15 minutes. A draft started in the QuikStor app (staff move-in) is cleared by the nightly cleanup that runs shortly after midnight facility time.
A draft can also be cleared by hand on the Unit Overview screen, which releases the unit and cannot be undone. See how to Discard a Move-In Draft for the steps.
6. When can a Move-In draft not be discarded?
A draft cannot be discarded once a Move-In payment has been submitted – the system shows “Move-in payment has already been submitted for this lease.” At that point, the Move-In is too far along to discard, and the draft is finished or reversed instead of discarded.
7. Why is Send Email or Send SMS grayed out on the Signature screen?
Send Email is grayed out when the tenant has no email address. Send SMS is grayed out when the tenant has no phone number, or when no SMS Signature template is assigned to the facility.
Add the missing email or phone number on the Tenant Information screen – and, for SMS, create a Trigger Template at the Corporate level. Set its type to SMS and trigger type to SMS Signature and assign it to the facility.
Related Articles
Change the Security Deposit During a Move-In (coming soon)


























