Skip to main content

Understanding the Tenant Transfers Process

Moving a tenant to a different unit? See what QuikStor handles for you – the credit from the old lease, the security deposit, gate access, and unfinished transfer drafts.

Overview

A tenant transfer moves an existing tenant from one unit to another unit at the same facility. During a transfer, QuikStor ends the lease on the old unit, starts a new lease on the new unit, and settles the money between the two leases on one transfer invoice. This article explains when a transfer can start and complete, how the charges and credits are calculated, and what changes for both units and for the tenant's gate access afterward.

Key Concepts

These terms are used throughout this article to describe a tenant transfer. Not every term appears as a label in QuikStor – some terms are used in this article only to explain the transfer process.

  • Tenant transfer – The process that moves an existing tenant from one unit to another unit at the same facility.

  • Old unit – The unit the tenant occupies before the transfer.

  • New unit – The vacant unit the tenant moves to in the transfer.

  • Transfer draft – An unfinished transfer that QuikStor saves when you click Next to Financial on the Tenant Information tab.

  • Transfer invoice – The single invoice that settles the charges on the new lease against the credit from the old lease.

  • Old Lease Credit – The amount credited from the old lease and applied to the transfer invoice.

  • Pro-rated charge – A charge that covers only part of a billing period instead of the full period.

  • Rate source – The rate that the rent on the new lease is based on: the Street Rate, the Web Rate, or a custom rate entered during the transfer.

How It Works

A tenant transfer follows the same model every time: QuikStor checks that the transfer can start, settles the money between the old lease and the new lease, and then switches the tenant to the new unit. The sections below describe each part of that model.

What a Tenant Transfer Does

A tenant transfer replaces the lease on the old unit with a new lease on the new unit in one process. A completed tenant transfer has these results:

  • The lease on the old unit is terminated.

  • A new lease starts on the new unit. Undo Move-In is not available for a lease created by a tenant transfer.

  • The charges and credits of both leases are settled on one transfer invoice.

  • The old unit becomes Vacant, and the new unit becomes Occupied.

  • The tenant's gate access moves from the old unit to the new unit.

A tenant transfer is different from a move-out followed by a new move-in. A move-out only records a refund entry for the tenant, as described in how a move-out works. A tenant transfer carries the credit from the old lease to the new lease.

When a Tenant Transfer Cannot Start

QuikStor checks the facility, the tenant's lease, and the new unit before a tenant transfer can start. A tenant transfer cannot start in any of these cases:

  • If the facility is inactive, then a tenant transfer cannot start.

  • If the tenant has no active lease on the old unit, then a tenant transfer cannot start from that unit.

  • If the old unit already has a transfer draft, then a second tenant transfer cannot start for that unit.

  • If the new unit is not Vacant, then the unit cannot be selected for the transfer.

  • If the new unit is Inactive, Unrentable, or a Company unit, then the unit cannot be selected for the transfer.

  • If the tenant has an outstanding balance on the old lease, then a tenant transfer cannot start. QuikStor shows the message “Cannot transfer: there is an outstanding balance on the old lease.” Collect the outstanding balance first.

When a tenant transfer starts, QuikStor changes the status of the new unit to Unavailable. The new unit stays Unavailable until the tenant transfer is completed or the transfer draft is discarded. A transfer draft is discarded manually, automatically after midnight, or by a move-out from the old unit. The new unit then returns to Vacant.

ℹ️ Info: A unit can have only one transfer draft at a time. If the old unit already has a transfer draft, then resume or discard that transfer draft before starting another tenant transfer for the same unit.

How QuikStor Settles the Money Between the Two Leases

Settling the money in a tenant transfer means that QuikStor closes the charges on the old lease and applies what is left to the new lease. QuikStor settles the money in this way:

  • The recurring charges for the current billing period on the old lease are pro-rated from the transfer date, which is the facility’s current date. The pro-rating applies to rent, coverage, and recurring fees.

  • The charges for future billing periods on the old lease are credited in full.

  • The credit from the old lease moves to the new lease and appears as the Old Lease Credit on the transfer invoice.

  • The charges on the new lease depend on the Billing Period you choose: the pro-rated amount for the rest of the current billing period, with or without additional full periods.

  • The rent on the new lease is based on the rate source, which you choose on the Financial tab: the Street Rate (the default), the Web Rate, or a custom rate.

If the tenant has paid a security deposit on the old lease, the paid security deposit is included in the Old Lease Credit. If the new unit has a security deposit, that security deposit is charged in full on the transfer invoice, so a higher or lower deposit is settled in the invoice total.

ℹ️ Info: A security deposit is not refunded in a tenant transfer. The security deposit paid on the old lease is included in the Old Lease Credit on the transfer invoice.

Furthermore, if the tenant's payment plus the Old Lease Credit is more than the total of the transfer invoice, then QuikStor turns the surplus into additional rent invoices on the new lease. The surplus is not refunded to the tenant.

When a Tenant Transfer Cannot Be Completed

QuikStor checks the transfer again before a tenant transfer can be completed. A tenant transfer cannot be completed in any of these cases:

  • If a signature request was sent with Generate Code, Send Email, or Send SMS and the lease is not signed yet, then the tenant transfer cannot be completed.

  • If the transfer invoice has not been calculated on the Financial tab, then the tenant transfer cannot be completed.

  • If the new unit is no longer Rentable or Active, then the tenant transfer cannot be completed.

  • If the facility becomes inactive after the tenant transfer starts, then the tenant transfer cannot be completed.

What Changes After a Transfer

Completing a tenant transfer changes both leases, both units, and the tenant's gate access at the same time. After a tenant transfer is completed:

  • The old lease is terminated, and the new lease is active.

  • The old unit is Vacant, and the new unit is Occupied.

  • Access to the old unit is revoked, and access to the new unit is granted automatically. The facility’s automatic access settings for move-ins do not apply to tenant transfers.

  • QuikStor sends the Transfer Completion email and SMS templates that are assigned to the facility in Trigger Templates, under Assignment in the Templates menu. If no template is assigned to the facility, then nothing is sent.

  • The transfer appears in the Movement Analysis report.

  • The transfer counts as a move-out from the unit group of the old unit and a move-in to the unit group of the new unit in the 30-day velocity shown on the Rate Management and Rate Assistant screens.

  • Autopay that is turned on for the old lease moves to the new lease and is turned off on the old lease.

Using the Feature

Using the tenant transfer feature means working through five tabs in order:

  1. Select Unit

  2. Tenant Information

  3. Financial

  4. Signature

  5. Payment

A tenant transfer screen with the Select Unit, Tenant Information, Financial, Signature, and Payment tabs highlighted

The sections below describe what each tab does; the full click path is covered in the steps to transfer a tenant.

Where to Start a Transfer

Staff can start a tenant transfer with the Transfer icon on the occupied unit's Overview tab. The Transfer icon is in the top-right corner and looks like two arrows pointing in opposite directions.

The Overview tab of an occupied unit with the Transfer icon highlighted to the left of the Make a Payment button

A tenant transfer can also start from the List of All Units screen, where the same Transfer icon is at the end of the unit's row. A tenant transfer cannot start from the tenant's profile.

The List of All Units screen with the Transfer icon highlighted at the end of an occupied unit’s row

ℹ️ Info: A tenant transfer can be started only by facility staff in QuikStor.

The Transfer icon can be clicked only for units that are available for transfer. If the PTD (Paid Through Date) of the unit's lease is in the past, then the Transfer icon is grayed out on both the List of All Units screen and the unit's Overview tab.

The List of All Units screen with the grayed-out Transfer icon enlarged, showing the “Lease PTD is in past.” tooltip for an occupied unit

The Transfer icon is not shown without the Transfer (Transfer) and Read Field Settings facility-level permissions. A tenant transfer always applies to the facility shown in the Facility Switcher.

Select Unit Tab

The Select Unit tab is where you choose the new unit for the tenant transfer. The Select Unit tab lists only Vacant units at the facility, in a table. A unit with any other status is not listed and cannot be chosen as the new unit. Some listed units cannot be selected, for example, a unit with no delinquency template assigned. A tooltip on the unit explains the reason.

The Select Unit tab with a unit that cannot be selected

You can narrow the table of vacant units with the filters at the top of the Select Unit tab: Unit Group, Class, Dimension, Damaged, Area, In Place Rate, Move-In Date, and Category. On smaller screens, the Area, In Place Rate, Move-In Date, and Category filters are in the More Filters drawer. To reset the applied filters, click the X button at the end of the filters.

The More Filters link opens a drawer with additional filters for the table of vacant units, including Width, Length, Height, Climate Controlled, Floor, Locality, and Door Type.

The More Filters link on the Select Unit tab and the drawer it opens

You can sort the table of vacant units by Unit, Unit Group, Street Rate, or Web Rate. To clear the sort, click the X button in the top-right corner of the table.

The Select Unit tab with the X button highlighted in the top-right corner of the table, which clears the applied sorting

The Select Unit tab also has three links: Back to Unit List, Exit Transfer, and Next to Tenant Information. Next to Tenant Information is grayed out until a Vacant unit is selected in the table.

If you make changes on the Select Unit tab and then click Back to Unit List or Exit Transfer, then a modal appears. The modal shows the message "You have unsaved Changes! Are you sure you want to leave the page? If you leave the page, changes will not be saved." and has two buttons: Discard Changes and Cancel.

The unsaved changes modal on the Select Unit tab

Both Back to Unit List and Exit Transfer lead to the List of All Units screen. If you click Discard Changes in the modal, then the changes are not saved and no transfer draft is kept.

Tenant Information Tab

The Tenant Information tab shows the tenant's details from the original Move-In, already filled in. You can update any detail that has changed, for example, the phone number or the address, so that the new lease is correct.

The Tenant Information tab, scrolling from the Basic Information section down to the Lease Information section and the Back to Unit List and Next to Financial links

The contact details on the Tenant Information tab are also the details that Send Email and Send SMS use on the Signature tab.

The Tenant Information tab also has two links: Back to Unit List and Next to Financial. Back to Unit List returns to the Select Unit tab. Next to Financial saves the transfer draft and opens the Financial tab.

If you open the Financial tab and then go back to the Tenant Information tab, then a third link appears on the Tenant Information tab: Discard Transfer Process. Discard Transfer Process opens a modal with the message "Are you sure you want to discard Transfer Draft? This cannot be undone." The modal has two buttons: Yes, Discard Draft and No, continue.

The Discard Transfer Process link on the Tenant Information tab and the modal it opens

If you return to the Select Unit tab with Back to Unit List, then the Select Unit tab no longer shows the table of vacant units. The Select Unit tab shows the unit that is already selected for the transfer instead, under the heading "Transfer #[Old Unit Number] to #[New Unit Number]" and the text "Already selected unit for this transfer". The Selected Unit section shows the Unit Number, Unit Group, Security Deposit, and First Period Charge of the new unit. A different unit cannot be chosen at this point.

Financial Tab

The Financial tab is where the transfer invoice is calculated. The Financial tab has two settings and one button:

  • Billing Period – Pro-Rate Only charges only the rest of the current billing period. A number of periods charges the pro-rated amount plus that many full periods. The options appear as months, or as periods if the new unit has a custom billing cycle. Up to 12 months or periods can be selected.

  • Coverage – The coverage the tenant wants on the new lease. If private coverage is chosen, then the Add Private Coverage drawer opens, where staff enter the Name of Insurance Company and the Private Coverage Expiration Date and upload the coverage plan file.

  • Calculate Invoice – Calculates the transfer invoice and shows the Charges Overview section, where the credit from the old lease appears as the Old Lease Credit.

In the Charges Overview section, you can choose whether the rent on the new lease is charged at the Street Rate or the Web Rate. The Street Rate is selected by default. If you select a different rate, then the transfer invoice recalculates. The Street Rate and Web Rate options appear only if the new unit has a web rate.

The Financial tab with the Street Rate and Web Rate options highlighted at the top right of the Charges Overview section

You can also enter a custom rate directly in the Charges Overview section. Apply applies the custom rate, and the message "Manual Price overrides the rate card." appears together with the Revert to Street Rate link. Revert to Street Rate always restores the Street Rate, even if the Web Rate was selected before the custom rate was applied, and no confirmation modal appears. While a custom rate is applied, the Street Rate and Web Rate options cannot be changed.

In the Grand Total bar, you can use Add Fees or Add Items to add optional charges to the transfer invoice. Neither Add Fees nor Add Items is required to complete a tenant transfer.

The Financial tab also has three links at the bottom of the screen: Back to Tenant Information, Discard Transfer Process, and Next to Signature.

Signature Tab

The Signature tab is where the tenant signs the new lease. The Signature tab offers four signing methods:

  1. Print & Sign

  2. Generate Code

  3. Send Email

  4. Send SMS

The Signature tab with the four signing methods

If the tenant has no email address, then Send Email is grayed out, and if the tenant has no phone number, then Send SMS is grayed out. If a signature request was sent with Generate Code, Send Email, or Send SMS and the lease is not signed yet, then the tenant transfer cannot be completed.

The Signature tab also has four links: Back to Financial, Discard Transfer Process, Skip, and Next to Payment. Next to Payment is grayed out until one of the four signing methods is selected.

Skip opens a modal with the message "Are you sure you want to skip signature? You will be able to sign later." The modal has two buttons: Skip Signature and Cancel. Skip Signature cancels a signature request that was already sent, and the tenant transfer can still be completed. The lease can be signed later with Sign Lease on the page of the new unit. Skip is shown only to users with the permission to skip signatures.

Payment Tab

The Payment tab shows the amount due for the new unit and records how the tenant pays. You can choose Saved Payment Methods (if any), Credit Card, Cash, ACH (Automated Clearing House), or Check and enter the details for that payment method.

The Payment tab with the payment methods enlarged, showing the Credit Card, Cash, ACH, and Check options

If the tenant transfer results in a credit for the tenant, then the Payment tab does not ask for a payment. The Payment tab shows the credit amount instead, and the credit applies to future amounts on the new lease. In both cases, Complete Transfer completes the tenant transfer.

The Payment tab for a tenant transfer that results in a credit

If the tenant pays with Cash, then you can enter an amount that is higher than the amount due. In that case, the Payment tab shows the messages “Minimum allowed amount is [Amount Due]” and “You have exceeded the amount of [Amount Due] by [Excess Amount]” and the Add Change to the Balance toggle.

If Add Change to the Balance is on, then the whole cash amount is recorded and the excess is applied as prepaid rent on the new lease. If Add Change to the Balance is off, then the excess is shown as Change Due to Tenant and is returned to the tenant.

An amount lower than the amount due is not accepted, and the message “You are missing [Amount] out of [Amount Due]” appears. An amount higher than the amount due can be entered only for Cash. For Check, the amount must be exact.

The Pay with Cash section of the Payment tab showing a cash amount higher than the amount due and the Add Change to the Balance toggle

The Payment tab also has three links: Back to Signature, Discard Transfer Process, and Complete Transfer.

Transfer Completed Screen

The Transfer Completed screen confirms that the tenant moved from the old unit to the new unit. The screen shows the tenant who was transferred, the unit number of the old unit, and the unit number of the new unit. All three are links:

  • The tenant's name opens the tenant's Overview tab.

  • The unit number of the old unit opens the Overview tab of the old unit.

  • The unit number of the new unit opens the Overview tab of the new unit.

Below, the Transfer Completed screen shows the message "The document may not be available for immediate download. Please try again in a few minutes, or visit Documents to download it later." In that message, Documents is a link that opens the tenant's Documents tab. If Download Agreement does not provide the new lease agreement right away, then you can download the agreement later from the tenant's Documents tab.

The Transfer Completed screen also has three options:

  • Download Agreement saves the new lease agreement.

  • View Communication shows the messages sent for the transfer.

  • View Lease opens the Overview tab of the new unit.

The Transfer Completed screen showing the tenant and the two unit numbers, the Documents link, and the Download Agreement, View Communication, and View Lease buttons

Leaving and Resuming an Unfinished Transfer

You can leave a tenant transfer before the transfer is completed, with Exit Transfer on the Select Unit tab or Discard Transfer Process on the Financial, Signature, and Payment tabs. Discard Transfer Process also appears on the Tenant Information tab after the Financial tab has been opened.

Discard Transfer Process opens a modal with the message "Are you sure you want to discard Transfer Draft? This cannot be undone." The same modal appears on every tab that has Discard Transfer Process. If you click Yes, Discard Draft, then the transfer draft is discarded and cannot be restored, and the List of All Units screen opens. Discarding a transfer draft requires the Discard Draft permission.

If you leave the Select Unit tab with Exit Transfer or Back to Unit List and click Discard Changes, then no transfer draft is kept and the tenant transfer has to be started again. A transfer that is interrupted in another way is kept as a transfer draft, and you can resume or discard the transfer draft from the drafts list on the Task List screen – choose Finish Transfer or Discard, respectively.

The Transfer Drafts section is not shown when there are no transfer drafts.

The Transfer Drafts section on the Task List screen, enlarged to show a transfer draft and the Finish Transfer and Discard options in its menu

ℹ️ Info: A transfer draft is not kept overnight. QuikStor discards every transfer draft shortly after midnight, in the facility's local time, so a tenant transfer that is left unfinished overnight has to be started again.

Edge Cases and Conditions

These conditions change how a tenant transfer behaves.

  • If a move-out is completed for a unit that has a transfer draft, then the transfer draft is discarded.

  • If a unit has an active transfer draft, then a move-in or a move-out on that unit cannot be undone.

  • If the tenant's payment plus the Old Lease Credit is more than the total of the transfer invoice, then the surplus becomes additional rent invoices on the new lease.

Troubleshooting

Use these checks when a tenant transfer does not behave as expected:

  • If the Transfer icon is not shown, then check that the Transfer (Transfer) and Read Field Settings facility-level permissions are active and that the unit is Occupied.

  • If a unit is missing from the Select Unit tab, then check the status of that unit. Only Vacant units are listed.

  • If a tenant transfer cannot start for a unit, then check the Task List screen for an existing transfer draft for that unit and resume that transfer draft.

  • If the message “Cannot transfer: there is an outstanding balance on the old lease.” appears, then collect the outstanding balance on the old lease and start the tenant transfer again.

  • If a tenant transfer cannot be completed, then check that no signature request is still waiting for the tenant and that the transfer invoice is calculated on the Financial tab. To cancel a waiting signature request, click Skip on the Signature tab.

  • If a transfer draft is no longer in the Transfer Drafts section of the Task List screen, then the transfer draft was discarded after midnight, and the tenant transfer has to be started again.

  • If the tenant has no access to the new unit after the transfer, then check the tenant’s keycode. To add access manually, open Keycodes under Site Access, click Edit, and then click Add Access. You can also click the pencil icon on the keycode on the tenant’s page.

FAQ

These are the most commonly asked questions about tenant transfers.

1. What happens to the security deposit when a tenant transfers to a new unit?

The security deposit paid on the old lease is included in the Old Lease Credit when a tenant transfers to a new unit. If the new unit has a security deposit, that deposit is charged in full on the transfer invoice. No security deposit refund is made in a tenant transfer.

2. Does the tenant get credit for rent already paid on the old unit?

Yes, the tenant gets credit for rent already paid on the old unit. QuikStor pro-rates the current billing period, credits future billing periods in full, and applies the result to the transfer invoice as the Old Lease Credit.

3. Can an unfinished transfer be completed later?

Yes, an unfinished transfer can be completed later on the same day with Finish Transfer in the Transfer Drafts section of the Task List screen. A transfer draft is discarded shortly after midnight, in the facility's local time, so the tenant transfer has to be started again the next day.

4. Why is a unit missing from the Select Unit tab?

A unit is missing from the Select Unit tab when the unit is not Vacant. The Select Unit tab lists only Vacant units at the facility.

5. Does gate access move to the new unit automatically?

Yes, access moves to the new unit automatically. When the tenant transfer is completed, access to the old unit is revoked and access to the new unit is granted. The facility’s automatic access settings for move-ins do not apply to tenant transfers.

6. Can a tenant be transferred to a unit at another facility?

No, a tenant cannot be transferred to a unit at another facility. A tenant transfer moves a tenant between two units at the same facility.

Related Articles

Did this answer your question?