Skip to main content

Units: Facility Map View

Find units by status and other attributes on the Facility Map in the Units section, check unit details in the unit drawer, and start a move-in, a move-out, or a payment from the map.

Overview

The Facility Map in the Units section shows the layout of a facility, with every unit colored by its current status. Facility staff use the map to find a unit by location and status and to start a move-in, a move-out, or a payment. The layout comes from Settings in the sidebar menu. The map here allows viewing, searching, filtering, and downloading, but it does not allow layout changes.

Key Concepts

This article uses the following terms for the Facility Map in the Units section – unit drawer, indicator, and grayed-out unit describe parts of the map, not screen labels.

  • Facility Map – A drawing of the facility, as seen from above, that shows where each unit is on each floor. Facility staff create the layout at the Facility level in Settings.

  • Unit status – The current state of a unit. The color of the unit on the map and the status badge in the unit drawer show the unit status, for example, Vacant or Delinquent.

  • Indicator – A small colored dot in the top-right corner of a unit that marks an extra unit condition, for example, Damaged or Unrentable.

  • Unit drawer – The drawer that opens when a user clicks a unit on the map. The unit drawer shows the unit details and the actions available for the unit status.

  • Grayed-out unit – A unit that does not match the active search or filter. A grayed-out unit stays on the map but does not respond to clicks.

How It Works

In the Units section, the Facility Map combines the layout from Settings with live unit data. This section explains where the map comes from, how unit status and unit conditions appear, which units the map shows, and which view opens under Units.

Where the Map Comes From

The Facility Map in the Units section shows the same floors, units, objects, and labels as the map in Settings. Facility staff build and change the layout only in Settings, where they create the facility map for the first time. If no map exists for the facility yet, then the map in the Units section has no layout to show.

Unit data on the Facility Map is live. When the status of a unit changes, for example, after a move-in, the color of the unit on the map changes too.

Unit Colors and Indicators

Each unit on the Facility Map has the color of its unit status. The map in Settings uses the same colors, and the List of All Units screen uses the same status codes:

  • VAC (green) – Vacant. The unit is empty and available to rent.

  • OCC (orange) – Occupied. The unit has an active lease.

  • RES (violet) – Reserved. A tenant has reserved the unit but has not moved in yet.

  • UNA (gray) – Unavailable. A move-in process locks the unit for 15 minutes.

  • COM (light blue) – Company. The company uses the unit internally, and facility staff set the Company status on the unit.

  • DLQ (red) – Delinquent. The unit is occupied, and the tenant is behind on payments.

In addition to the color, a unit can carry an indicator – a small colored dot in its top-right corner that marks one of the following conditions:

  1. Orange dot – The unit is Unavailable Online, which means that tenants cannot rent or reserve the unit online.

  2. Violet dot – The unit is both Damaged and Unrentable, which means that the unit has damage and tenants cannot move into it.

  3. Red dot – The unit is Damaged, which means that facility staff marked the unit as damaged, but tenants can still move into it.

  4. Gray dot – The unit is Unrentable, which means that tenants cannot move into the unit until facility staff mark it as rentable again.

Facility Map in the Units section with the orange, violet, red, and gray indicator dots numbered 1 to 4

Facility Map with the orange, violet, red, and gray indicator dots numbered

An indicator appears on the Facility Map as soon as the unit condition changes, for example, right after a unit becomes Unrentable. The indicator adds a dot to the unit but does not change the unit status or the status color of the unit. A vacant unit that is both Damaged and Unrentable keeps the Vacant status and the green color, and only the violet dot shows the condition.

On the Facility Map, a unit without any of these conditions has no indicator. A Company unit is always Unrentable, so it shows the gray dot.

Facility staff set the Damaged and Unrentable conditions on the Overview tab of the unit, where they mark a unit damaged or mark a unit unrentable. Turning off both Available for Rental Online and Available for Reservation Online on the unit Setup tab adds the orange Unavailable Online indicator.

ℹ️ Info: The violet indicator dot on the Facility Map means that a unit is both Damaged and Unrentable. A Reserved unit is violet as a whole, while an indicator is only a small dot in the top-right corner of the unit.

ℹ️ Info: The orange Unavailable Online indicator on the Facility Map is not the same as the gray Unavailable unit status. The Unavailable status locks a unit for 15 minutes during a move-in process. The Unavailable Online indicator only blocks online rental and online reservation, so a move-in process can still start from the unit drawer.

Which Units the Map Shows

By default, the Facility Map in the Units section opens with the Active filter set to Yes, so the map shows only active units. If a unit is inactive, then the unit stays hidden on the map until a user clears the Active filter.

A unit appears on the Facility Map only after facility staff place it on a floor in Settings. Only an active unit that has Width and Length can go on a floor. The Add Unit button on the List of All Units screen adds a unit to the list, but not to the map.

Which View Opens Under Units

Clicking Units in the sidebar menu opens the List of All Units screen by default. While a user stays logged in, the browser remembers the last open view, so after the user leaves the Facility Map, clicking Units opens the map again. After the user logs out and logs in again, Units opens the List of All Units screen.

The search and filters stay applied while the map is open. After a user leaves the map and opens it again, the search field is empty, and only the Active filter is set to Yes. Save as Default View (eye icon) saves only the zoom and position of the map, not the filters or the selected floor.

Using the Feature

This section explains how to open the Facility Map, find a unit on the map, view the unit details, and start an action from the unit drawer.

Opening the Facility Map

The Units section has three views, including the Facility Map. The view switcher in the top-right corner of the screen has one icon for each view:

  1. List of All Units

  2. Facility Map

  3. Unit Groups

To open the Facility Map, select Units in the sidebar menu, and then click the map (pin) icon in the view switcher.

Facility Map in the Units section with the List of All Units, Facility Map, and Unit Groups icons in the view switcher numbered 1 to 3

Facility Map in the Units section with the three views in the view switcher numbered

Finding a Unit on the Map

To find a unit on the Facility Map, use the following tools above the map:

  1. Floor bar – Shows the floors of the facility. The map always opens on the first floor from the left in the floor bar, and clicking a floor name shows that floor.

  2. Search field – Finds one unit by its number.

  3. Filter bar – Finds units by status and other unit attributes.

Facility Map in the Units section with the floor bar, the search field, and the filter bar numbered 1 to 3

Facility Map in the Units section with the floor bar, the search field, and the filter bar numbered

To find one unit on the Facility Map by its number, enter the unit number in the search field at the left end of the filter bar. The matching unit keeps its color, and every other unit is grayed out.

Facility Map with unit A109 in the search field and every other unit grayed out

Facility Map with A109 in the search field and every other unit grayed out

To find units by status or unit attributes on the Facility Map, use the filter bar. The filter bar shows Unit Group, Class, Dimension, Status, Active, Damaged, Rentable, Delinquent, PTD (Paid Through Date), Area, In Place Rate, Move-In Date, and Category.

The window width decides how many of these filters fit in the filter bar. More Filters opens a drawer with the filters that do not fit and with more unit attribute filters, for example, Width or Climate Controlled.

Facility Map in the Units section with the More Filters drawer highlighted

Facility Map in the Units section with the More Filters drawer highlighted

Units that match the filters keep their color, while the other units are grayed out and do not respond to clicks. With a search and filters together, only the units that match both keep their color. To clear all filters, click the X icon at the right end of the filter bar.

Facility Map with the Delinquent filter set to Yes and only the delinquent unit in color

Facility Map with the Delinquent filter set to Yes and only the delinquent unit in color

Navigating the Map

The toolbar above the Facility Map in the Units section has the same view tools as the map in Settings, but no editing tools. The guide to map tools and filters explains each view tool, including the PDF download and Drag Mode, which moves the whole view. The mouse and keyboard also control the view of the Facility Map:

  • Scroll the mouse wheel to move the map up or down.

  • Hold Shift and scroll the mouse wheel to move the map left or right.

  • Hold Ctrl and scroll the mouse wheel to zoom in or out.

  • Hold Space and drag to move the map freely.

Show Details (info icon) in the toolbar opens the Facility Map Details drawer with the color legend and these mouse and keyboard shortcuts.

Facility Map Details drawer with the color legend and the mouse and keyboard shortcuts

Facility Map Details drawer with the color legend and the mouse and keyboard shortcuts

Viewing Unit Details

Clicking a unit on the Facility Map opens the unit drawer for that unit. The unit drawer shows the following details:

  1. The unit number. Click the unit number to open the Overview tab of the unit.

  2. The unit status, for example, Occupied. If the unit has an extra condition, then the indicator dot appears next to the unit status. Hovering over the dot shows the name of the condition, for example, Unrentable.

  3. The tenant assigned to the unit, if any. Click the tenant name to open the Overview tab of the tenant.

  4. The unit size and type, for example, 10x10 1st Fl DU Storage.

  5. The attributes assigned to the unit, for example, Width, Length, Locality, Floor, Area, and Class.

Facility Map in the Units section with the unit drawer details numbered 1 to 5

Facility Map in the Units section with the unit drawer details numbered

ℹ️ Info: For a damaged unit, the unit drawer on the Facility Map also shows the message "Unit is Damaged". The unit drawer of a unit that is not damaged has no such message.

Starting an Action From the Unit Drawer

The actions at the bottom of the unit drawer on the Facility Map depend on the unit status. Up to three actions are available – Move-In, Move-Out, and Make a Payment:

  • Vacant – The unit drawer shows Close and the Move-In button, which starts the process to move a tenant in.

Unit drawer of a vacant unit with the Move-In button highlighted

Unit drawer of a vacant unit with the Move-In button highlighted

  • Occupied and Delinquent – The unit drawer shows Close, the Move-Out icon, and the Make a Payment button. The Move-Out icon has no text label and shows its name on hover. Clicking the icon starts the process to move a tenant out, and Make a Payment starts the process to take a tenant payment.

Unit drawer of an occupied unit with the Move-Out icon and the Make a Payment button highlighted

Unit drawer of an occupied unit with the Move-Out icon and the Make a Payment button highlighted

  • Reserved, Company, and Unavailable – The unit drawer shows no action buttons and no Close button. To close the unit drawer, click the X icon in its top-right corner. For an Unavailable unit, the unit drawer also shows the tenant in the move-in process.

Facility Map with the unit drawer of a Company unit highlighted

Facility Map with the unit drawer of a Company unit highlighted

ℹ️ Info: If a vacant unit is Unrentable, then the Move-In button in the unit drawer on the Facility Map is grayed out. Hovering over the button shows the message "Unit is not rentable". A tenant can move into the unit only after facility staff mark it as rentable again.

FAQ

These are the most commonly asked questions about the Facility Map in the Units section.

1. Why can't I click a unit on the Facility Map?

A grayed-out unit on the Facility Map does not respond to clicks, because the unit does not match the active search or filter. To make every unit clickable again, clear the search field and click the X icon at the right end of the filter bar.

2. Why does the unit drawer show no action buttons?

The unit drawer on the Facility Map shows action buttons only for Vacant, Occupied, and Delinquent units. A Reserved, Company, or Unavailable unit shows no action buttons, and the X icon closes its unit drawer. If a vacant unit is Unrentable, then the Move-In button is visible but grayed out.

3. Why is a unit missing from the Facility Map?

A unit is missing from the Facility Map in the Units section for one of two reasons. If the unit is inactive, then clear the Active filter to see the unit. If the unit is not on a floor yet, then place the unit on a floor in Settings.

4. Can I change the Facility Map in the Units section?

No, the Facility Map in the Units section is view-only. Layout changes happen only in Settings, and only for users with the Edit (Facility Map) facility-level permission.

5. Does Save as Default View save my filters on the Facility Map?

No, Save as Default View on the Facility Map saves only the zoom and position of the map, not the filters or the selected floor. In the Units section, the map always opens on the first floor from the left in the floor bar, with only the Active filter set to Yes.

6. What does the small colored dot on a unit mean?

The small colored dot in the top-right corner of a unit on the Facility Map is an indicator of an extra unit condition, for example, Damaged or Unrentable. Hovering over the dot in the unit drawer shows the name of the condition. The dot does not change the unit status or the status color of the unit.

Related Articles

Did this answer your question?