Release Status
Trial Release Date: October 1, 2026
Production Release Date: October 6, 2026
Version: 4.3.202
What's New at a Glance
New Features
Platform Improvements
Delinquency, Auctions, and Lien Sales
Tasks and Dashboards
Communications and Documents
AI Tools
Reservations and Move-Ins
Accounting, Reports, and API
Search and General Usability
Enhancements
Name and Label Updates
AI Tools
Communications and Documents
Delinquency
Units, Leases, and Fees
Users, Permissions, and Security
Accounting
Bug Fixes
New Features
Minimum Move-Out Notice Period
Get the lead time you need to prepare, and re-rent, every unit.
A move-out date is only useful if it gives you time to act on it. With a minimum move-out notice, you decide how much warning tenants must give when they schedule a move-out in the tenant portal. That gives you time to plan cleaning, forecast availability, and get the unit back on the market before it's empty.
Until now, a tenant could pick today or tomorrow as their move-out date, and you'd find out a unit was emptying with almost no time to prepare. Now, you can set the notice period as a number of days in your facility's Tenant Portal Settings.
Set the minimum notice period in days for each facility, in its Tenant Portal Settings
From then on, the tenant portal only lets tenants pick a date outside that window: with a 30-day minimum, the earliest date a tenant can choose is 30 days from today. Tenants see the requirement right where they choose the date, so they know what to expect without calling the facility.
Nothing changes until you turn it on. Facilities that leave the setting blank or set it to zero keep today's behavior, where tenants can pick any future date. The rule applies only to move-outs that tenants schedule themselves in the tenant portal.
Learn more → Configure Tenant Portal for a Facility
Account Credit Activity Report
See every credit your team gives out, and whether it paid off.
Credits are one of the most useful tools your managers have, whether they're nudging a tenant onto Auto-Pay or smoothing over a service issue. But there was no simple way to see how often credits were given, who gave them, or whether they did their job, short of piecing it together from individual tenant accounts.
The new Account Credit Activity report brings every manager-applied credit into one view, so you can spot patterns, repeat what works, and rein in what doesn't.
For every credit in the date range and facilities you choose, the report shows:
The amount, the date, who applied it, and the reason they entered
Whether the tenant was on Auto-Pay before the credit, and whether they're on it today
The tenant's balance when the credit was applied, compared with their balance now
How long the tenant has been with you
How many other credits the same lease received in the previous 12 months, and their total
Each credit shows who applied it and why, along with the tenant's Auto-Pay status and account balance at the time of the credit and now
Results are grouped by facility, with a subtotal for each facility and a grand total across all of them. You can download the report as an Excel spreadsheet or a PDF. Facilities with no credits in the period still get their own section, so you can tell "no credits given" apart from a facility that was left out of the run.
The report covers credits applied through General Credits (credits a manager adds by hand to a tenant's account). Payments and other ledger entries aren't included.
Platform Improvements
A Faster QuikStor
Less waiting and more doing, especially when your day is busiest.
Every moment spent waiting on a screen is a moment you're not spending with a tenant. That's why we've made QuikStor faster. Everyday tasks like opening screens, searching, and saving changes respond more quickly, and the system stays quick during your busiest hours.
There's nothing you need to do, and nothing changes in how you use QuikStor. These improvements are rolling out gradually, so you may notice the difference over the coming weeks.
Restart Delinquency During an Auction
Give tenants a second chance, right up until the auction closes.
Sometimes a tenant catches up or reaches an agreement after their unit has already gone to auction. Now you can restart their delinquency process at any point before the auction closes with a sale. Previously, Restart Delinquency became unavailable the moment a process reached the Auction stage, even when the auction was still running.
This works on the Active Delinquencies screen for both a single restart and a bulk restart. Leases in the Auction stage can now be included in a bulk selection. When a restart cancels a running auction, the confirmation tells you before you proceed. After the restart, the row updates right away to show the cancelled auction.
Restart Delinquency is available for leases in the Auction stage, and the confirmation warns you before a running auction is cancelled
Once an auction has closed and the unit has sold, restart is no longer available. In a bulk restart, any leases in that state appear as Failed on bulk restart results, with the reason shown.
Learn more → Restart a Delinquency Process and Restart Delinquency Processes in Bulk
Payments During a Live Auction
A tenant who's ready to pay shouldn't have to wait for the auction to end.
When a tenant comes in ready to settle their balance, you want to take that payment on the spot, even if their unit is already up for auction. Now you can do so. The Pay button stays available while a unit is in a live auction. The button used to be unavailable for the whole length of the auction, so a tenant had no way to pay their way out of it.
The Pay button stays available even when the unit is in a live auction
Once the payment is taken, the auction is cancelled and its Storage Treasures listing is removed. There's no separate step to take.
Heads up: A cancelled auction can't be picked up where it left off. If the unit reaches the Auction stage again later, its auction setup, including the unit content, has to be completed again from the start.
Review Unit Contents from Lien Sale Publications
Check what's in a unit without ever leaving your publications.
When you're reviewing a lien sale publication, confirming what's in the unit is part of getting it right. Now you can open Unit Contents directly from the Lien Sale Publications screen. It opens in a drawer, so the unit's photos and description sit right next to the publication you're checking. Before, that meant leaving the screen, finding the unit, opening its contents, and then working your way back.
Open a unit's contents in a drawer right from the publication to see the photos and the description of stored goods without leaving Lien Sale Publications
Heads up: Regenerating a publication's ad text deletes its current affidavit. After regenerating, upload a new affidavit for that publication.
View Ledger Opens in a New Tab
Check a tenant's ledger, then pick up right where you left off.
Reviewing a publication often means checking the tenant's ledger too, and that shouldn't cost you your place. Now the View Ledger button opens the ledger in a new browser tab, and the publication you expanded and the Unit Content drawer stay open exactly as you left them. Previously, opening a ledger took you away from the Lien Sale Publications screen. When you came back, the expanded row had closed, and you had to find your place all over again.
View Ledger in the Unit Content drawer takes you straight to the tenant's lease ledger
Stop Delinquency when a Tenant is Marked Deceased or Bankrupt
Protect estates and bankruptcy accounts from delinquency, in the same step you already take.
When a tenant passes away or files for bankruptcy, the last thing you want is late fees, lien notices, or an auction running against their account. Now QuikStor asks whether to stop delinquency the moment you mark the tenant as deceased or bankrupt. Excluding the tenant used to be a separate step you had to remember, and any fees or notices that went out in the meantime had to be undone by hand.
Exclude a tenant from delinquency right from the Update Basic Information drawer, next to the Deceased and Bankrupt options
After you mark a tenant as deceased or bankrupt in Update Basic Information and save, a prompt asks whether to exclude them from delinquency. If you choose Yes, the tenant is excluded and any active delinquency processes on their leases are stopped. If you choose No, nothing else changes, and you can exclude the tenant later.
Heads up: The prompt appears only when you mark a tenant as deceased or bankrupt from this release onward. Tenants already marked before the upgrade aren't excluded automatically, so review them and exclude them from delinquency if needed.
Allowed to Remove Delinquency Templates only from Vacant Units
Remove templates only where it's safe, so every occupied and delinquent unit stays covered.
A delinquency template is what keeps late fees, notices, and the lien timeline running on schedule, so an occupied unit without one can quietly fall through the cracks. Now QuikStor keeps a template in place on every occupied and delinquent unit. Before this release, a template could be removed from these units entirely. That left the tenant outside the delinquency process until someone noticed and reassigned it.
If you try to remove a template from an occupied unit, the system stops you and suggests what to do instead
On occupied and delinquent units, you can still switch to a different template at any time. You can only remove a template completely from vacant units.
Heads up: You can no longer remove a delinquency template from an occupied or delinquent unit, though you can still switch it to another template. If you've been removing templates to stop delinquency for a particular tenant, exclude that tenant from delinquency instead.
Learn more → Understanding the Unit Setup Tab
Full Lien Auction History
Every lien auction, from live to sold to cancelled, now shows the full story.
When you look back at a past auction, you usually want the same few answers: who won, how to reach them, and when the unit needs to be cleared out.
Now the Lien Auctions list answers those questions for every auction on it, not just the ones still in progress. Until now, most of the history showed only a basic status badge with no details, so tracking down a winning bidder or a cleanout deadline meant leaving the platform and looking for answers elsewhere.
Closed auctions now show their full details. Hover over a sold auction to see the winner, their phone number, and the cleanout deadline
Every row now shows the same Auction Details you already see on Active Delinquencies. Hover over a closed auction to see the winner, their phone number, and the cleanout deadline. While posting is on hold, the row shows a Posting Blocked badge. This applies to completed and cancelled auctions as well as live ones.
Faster Task Selection on Long Task Lists
Clear your task list as fast as you can click.
When you're working through a long Task List, every click should keep up with you. Now, after you select all tasks, you can deselect them one at a time without any lag. On a long list, each click used to come with a noticeable pause, as if QuikStor were struggling to keep up.
Confirm Before Completing Tasks
Clear tasks in bulk with confidence, not by accident.
Completing tasks in bulk is a real time saver, but one stray click shouldn't wipe out a whole batch of work. Now QuikStor asks you to confirm before completing the tasks you've selected, whether that's one task or many. Complete Selected used to run immediately, with no warning, so a mis-click could mark tasks complete before anyone had actually handled them.
When the confirmation appears, choose Continue to complete the tasks or Cancel to go back with your selection unchanged.
Before your selected tasks are completed, a confirmation shows how many will be marked as complete
Delinquency Widgets for Your Dashboard
Your whole delinquency picture, right on your dashboard.
Collections work starts with knowing where to look. Eight new delinquency widgets bring your entire pipeline onto your dashboard, from the total amount owed to the tenants to call first. Before, getting that picture meant opening the Delinquency report and working through it. Now the numbers that matter are waiting for you as soon as you log in.
The new widgets are:
Delinquent Amount Due. The total owed by delinquent tenants, so you see the dollars behind the unit count.
Delinquency Aging. Units and amounts due in each days-late range, matching the Delinquency report summary.
Top Delinquent Tenants. Every tenant with a balance, largest first, ready to use as today's call list.
Units 90+ Days Delinquent. The balances that are hardest to recover, in a single number.
Units at Auction. How many delinquency processes have reached the Auction stage.
Active Delinquency Processes. How many delinquency processes are currently running at your facility.
Delinquency Pipeline by Stage. Units and amount due at each stage, from the start of the process through auction.
Auctions Blocked from Posting. Auctions whose legal advertisement can't post, so you can fix them before the timeline slips.
You'll find all eight under the Delinquency tag when adding widgets.
Delinquency Dashboard with all delinquency widgets
Learn more → Widgets and Dashboards: Every Number, One Screen
Coverage and Autopay Widgets for Your Dashboard
See every coverage gap, every coverage dollar, and every upcoming autopay charge at a glance.
Your coverage program protects tenants and earns revenue, but only if you can see where it's falling short. Six new coverage widgets bring it onto your dashboard, from how many units are covered to whether the program is making money this month. A seventh widget keeps your upcoming autopay schedule in view. In the past, that meant opening the reports and piecing it together. Now it's there as soon as you log in.
Six widgets put a different piece of your coverage program in view:
Coverage Penetration. The share of eligible units on coverage, matching the Coverage Roll Report.
Coverage Premium. The total premium flowing through your facility coverage program.
Coverage Plan Mix. Units and premium for each facility plan, alongside private coverage and units with no coverage.
Expired Private Coverage. Units whose private policy has lapsed, each one a chance to offer your facility plan.
Coverage Net Proceeds. Whether your coverage program is making money this month, after refunds, credits, and payables.
Private Coverage Policies. Private policies on file, soonest to expire first.
Coverage Dashboard with all coverage widgets
One more widget covers your autopay schedule:
Upcoming Autopay Charges. Leases on autopay with their next charge date, soonest first.
Autopay Dashboard with all autopay widgets
Learn more → Widgets and Dashboards: Every Number, One Screen
Financial Services Widgets for Your Dashboard
Know what you charge, what's about to change, and what to quote, before the phone rings.
Every pricing conversation goes better when the numbers are already in front of you. Eight new widgets put your rates, upcoming rate changes, rent roll, and today's specials right on your dashboard.
Answering "what are we charging?" or "what can I offer?" used to mean opening the Rate Management page, a Rent Roll report, or the specials setup. Now the answers are waiting when you log in. The widgets cover three areas of your business.
For rates and increases:
Net 30-Day Velocity. The net number of units gained or lost across all unit groups over the last 30 days.
Rate Management Snapshot. Street rate, web rate, vacancy, occupancy, and velocity for each unit group, just like the Rate Management page.
Scheduled Rate Increases. How many leases have a rate increase schedule assigned.
Upcoming Rate Changes. Scheduled rate changes, soonest first, with each lease's In Place Rate and its next rate.
Financial Services Dashboard showing rates and increases widgets
For your rent roll:
Security Deposits Held. The total security deposits you're currently holding.
Prepaid Balances. The total prepaid rent and credits applied.
Rent Roll Totals. Every rent roll total in one table, from In Place Rate through Total Due.
Financial Services Dashboard showing rent roll widgets
For specials:
Active Specials. The specials available at your facility today, so you know exactly what to quote.
Financial Services Dashboard showing the specials widget
You'll find all eight in the Add Widget drawer on your facility dashboard, tagged Revenue, Accounting, or Operations. Upcoming Rate Changes and Rent Roll Totals also include a View Report link, so the full report is one click away when you need more detail. The Web Rate column in Rate Management Snapshot appears only for facilities that use web rates.
Learn more → Widgets and Dashboards: Every Number, One Screen
Signature Requests Get Their Own Category in Manual Messages
Find the document you need signed without digging through every template.
When a tenant needs to sign something, you want the right document in front of them fast. Now, when you send a manual email or SMS, your e-sign templates sit in their own Signature request category, separate from your regular manual templates. Before, the two were mixed together in one list, so finding the right document to send for signature meant scrolling past every other template first.
Signature Request Mail now has its own option in the Send New Mail menu, separate from Email Manual Template from Templates
Learn more → Send an Email Signature Request and Send an SMS Signature Request
One Step to Send to the Mail House and Mark as Printed and Mailed
Send it once, and the document's status takes care of itself.
Keeping document statuses accurate matters, especially for lien letters, but it shouldn't take two steps. Now, when you choose to send a document to the Mail House, the document is sent and marked as printed and mailed in the same action. Previously, you had to go back and mark each document as printed and mailed yourself, and any document that got missed showed the wrong status.
This works for every document type you can send to the Mail House (QuikStor's print-and-mail service).
Build New Reports from Saved Ones with Run in New Chat
Start your next report from one you've already built.
A good report is often the starting point for the next one: the same data for a different period, one more column, or a new angle on the same question. Now you can open any saved report in Talk to Your Data (QuikStor's plain-language assistant for your facility data) in a new chat, pick up right where you saved it, and shape it into something new.
A saved report could only be re-run with its original options, so building a variation meant starting a fresh chat and asking for the whole thing again from scratch.
Run in New Chat sits right next to Run Report, so you can open any saved report in a fresh chat
Run in New Chat opens the saved report in a new chat, with the conversation continuing from the point where you saved it. From there, you can ask follow-up questions, change the format, or add and remove details. When you're happy with the result, save it as a new report. Your original saved report stays exactly as it was.
Learn more → AI Talk to Your Data
Review Report Changes Before They're Saved
See exactly what's changing in your report before you commit to it.
Asking Talk to Your Data to change a saved report is quick, but you should get the final say on what it becomes. Now, when you use Explain Report to request a change, like adding a column or switching to a chart, the change waits for your approval instead of being saved right away.
Until now, every requested change was applied automatically. If the result wasn't what you wanted, you had to ask again to undo it, and hope the report came back the way it was.
A Pending changes area shows what will change. Choose Save Changes to update the report, or Discard Changes to leave it as it was. A discarded request stays visible in the conversation, marked as Discarded, so you can see what you tried. Until you save, your report doesn't change.
Learn more → AI Talk to Your Data
Accept, Reject, or Edit Rate Assistant Recommendations
Turn rate recommendations into real rates, without leaving the assistant.
A good rate recommendation is only useful once it's on your rate sheet. Now you can act on every Rate Assistant recommendation right where you see it: accept it, reject it, or adjust it before it goes live. Before this release, recommendations were read-only. You had to leave the assistant, update each rate somewhere else, and remember which suggestions you'd actually followed.
For each recommendation, you can:
Accept. Apply the suggested street rate, effective immediately or on the effective date shown in the recommendation.
Reject. Keep your current rate, and optionally choose a reason such as "rate too high" or "seasonal."
Edit. Change the suggested amount or effective date before confirming it.
Act in bulk. Accept or reject all visible recommendations at once, with a confirmation step before anything changes.
Accept, Reject, and Edit options for Rate Assistant recommendations
Mark each recommendation as accepted, rejected, or edited, then review a summary of your decisions before applying them
Every decision is recorded with who made it, when, the original suggestion, and the final rate. The Rate Assistant also takes your past decisions into account, so its future recommendations reflect how you actually price.
Learn more → AI Revenue Management
Plan Your Whole Increase Cycle from a Goal with the ECRI Assistant
Describe the increase cycle you want, and every tenant due is priced for you.
Planning a rate increase cycle shouldn't mean working through tenants one row at a time, especially at a large facility. Now you can tell the ECRI Assistant (the AI assistant for existing customer rate increases) your goal in plain words, like "balanced" or "go easy on tenants with small balances." It prices every tenant due this cycle, consistently, with a plain-language reason for every tenant it holds back.
The assistant used to build proposals row by row. That worked for a small group of tenants but grew slow and unreliable as facilities got bigger.
Once you have a proposal, you can keep steering it in your own words. For example, you can:
Pick an overall approach for the cycle
Go gentler on a specific unit group
Relax or tighten preferences around balances, occupancy, and move-out risk
Hold a tenant or an entire unit group, with a reason, such as "hold the 10x25s, we're redoing the doors"
Tell the ECRI Assistant your goal in plain words, and it explains the result, including why each held tenant is being held
Each follow-up recalculates the whole cycle and keeps the exceptions you've already set. The assistant responds just as quickly at facilities with more than 1,000 units as at smaller ones.
The current ECRI Assistant stays exactly as it is. You choose which version to use when you start a conversation, and that choice stays fixed for the conversation.
Learn more → AI Revenue Management
AI Agent Explains Lockouts to Tenants
When a tenant can't get through the gate, the AI agent tells them why, and how to get back in.
A tenant stuck at the gate wants two answers fast: why their code isn't working, and what to do about it. Now the AI agent gives them both. When a locked-out tenant reaches out, the agent explains that their gate access is locked and that making a payment will restore it.
Those conversations would end up with your staff, often while the tenant was standing at the gate waiting for an answer.
Learn more → Voice AI - Automated Voice Assistant
AI Agent Respects Your Working Hours
No more after-hours transfers to an empty office.
A caller who asks for a manager should get a real answer, not a transfer that goes nowhere. Now the AI agent knows your facility's working hours. Outside those hours, it doesn't offer to escalate to a manager. Instead, it lets the caller know no managers are available and when to call back, for example, "Please call again tomorrow between 9:00 AM and 5:00 PM."
Before, the agent could escalate calls around the clock, so after-hours callers were promised a manager who wasn't there to pick up. During working hours, escalation works just as it does today.
Learn more → Voice AI - Automated Voice Assistant
No More Blank Pages from Outside Links to the Tenant Portal
Make every ad click count, even when the link leads to the wrong facility.
When someone clicks the ad on social media, you want that click to turn into a rental. Now, when a visitor without a tenant account follows an outside link, like an ad, to a facility that isn't set up for the Tenant Portal, they're taken straight to select location. That tab lists every facility in your company that is set up for the tenant portal, so the visitor can pick one and keep going.
Previously, the link opened a blank Units page. The visitor had nowhere to go, and the click you paid for was likely lost.
Invoices Created Until on the In Place Rates by Unit Report
Know the earliest date a rate increase can start, for every unit.
Planning a rate increase starts with a simple question: when is the earliest date it can take effect? The answer depends on how far ahead each unit has already been invoiced.
Now the In Place Rates by Unit report answers it directly, with a new Invoices Created Until column that shows the last date each unit has been invoiced through. For example, if a unit's latest invoice covers rent from 9/1/2026 to 9/30/2026, the column shows 9/30/2026.
The new Invoices Created Until column on the In Place Rates by Unit report shows the last date each unit has been invoiced through
Before this column, finding that date meant checking each tenant's ledger one by one. Additionally, the new column is available in the report's API endpoint.
Learn more → Facility Operations Reports: In Place Rates by Unit Report and Corporate Operations Reports: In Place Rates by Unit Report
Price Increase Prevention Report in the Public API
Bring your rate increase protections into the tools you already use.
The Price Increase Prevention report shows which tenants are protected from rate increases, and now that information can flow straight into your own systems. The report is available through the Public API at both the facility and company level.
Revenue management tools, dashboards, or custom integrations can pull it directly, instead of relying on someone to export it by hand.
Access is controlled by two new API permissions, one for facility-level data and one for company-level data. They're additive, so existing API access is unaffected. To use the report, an integration needs the relevant new permission.
Learn more → Facility Operations Reports: In Place Rates by Unit Report and Corporate Operations Reports: In Place Rates by Unit Report
Choose Which Cash Payments Go into a Bank Deposit
Record deposits that match exactly what went to the bank.
A bank deposit record is only useful if it matches what actually went to the bank. Now, when you create a bank deposit, you can choose which cash payments to include, the same way you already choose check payments.
Cash payments can now be selected individually, just like checks, and every payment starts out selected
Until now, every cash payment since the last deposit was included automatically. For facilities that don't deposit all of their cash at once, the deposit record couldn't match the real deposit.
All cash payments are selected by default, so if you deposit everything, nothing changes for you. If you leave any cash payments out, deposit notes are required, just as they are for checks. Any cash payment you leave out stays available for a later deposit.
Learn more → Create a Bank Deposit
More Helpful Global Search Results
Find the tenant, their units, and the facility, all in one search.
When you search for a tenant, you usually want to know what they rent and where. Now global search shows you both right in the results. Tenant results list the tenant's units, and unit results show the tenant who rents the unit. Each unit or tenant is clickable, so you can go straight to it. Every result now also shows the facility name, not just an icon.
Tenant results show the facility name, and current tenants also show the units they rent
Unit results show the facility name, and occupied units also show the tenant who rents them
In the past, getting from a search result to a tenant's units meant opening their record first, and working out which facility a result belonged to meant recognizing its icon.
Units appear in tenant results when they're occupied, delinquent, or reserved, each labeled with its category icon and unit number. If a tenant has more than three units, the rest are summarized as "+" followed by the number of additional units. Unit results show the tenant for occupied, delinquent, and reserved units.
Dialogs Keep the Page in Place
Pop-ups that stay put, on pages that stay smooth.
When a dialog is open, you should be able to focus on it without the page behind it moving around. Now the page behind a dialog stays locked in place for as long as any dialog is open, including when one dialog opens another, like a confirmation inside an edit window. Scrolling comes back as soon as you close the last one. In some cases, opening a second dialog used to let the page behind start scrolling again.
We've also made dialogs lighter behind the scenes. Long tables with an action on every row, like a delete button, stay smooth to scroll. Dialogs look and work exactly as before, and they still close with the X button, the Esc key, or a click outside. This applies across QuikStor, including the Tenant Portal.
Enhancements
"Dashboard" renamed to "Task List"
A name that tells you exactly what's inside.
The Dashboard screen goes by a new name in the sidebar, Task List, at both the Facility and Company level. At the Facility level, it's where you work move-in drafts, transfer drafts, and unit reservations. At the Company level, it's your company task list, with statistics and favorite reports alongside it.
The facility sidebar, with Task List at the top and Dashboards directly below it
Both screens are work queues, not dashboards, so the new name says what you'll actually find there. It also frees up Dashboards for your custom dashboards (see "Dashboards & Widgets" renamed to "Dashboards" below), so the two are no longer confused.
"Dashboards & Widgets" renamed to "Dashboards"
One clear home for all your custom dashboards.
In the facility sidebar, Dashboards & Widgets is now simply Dashboards. This is where you build your custom dashboards and add widgets to them, including the new delinquency, coverage, and rates widgets in this release.
The Dashboards page displaying one of the custom-made dashboards
With the Task List now under its own name, Dashboards means just one thing: the dashboards you build yourself. The shorter name is easier to spot in the sidebar and makes it clear what you'll find there.
"Delete Lease" renamed to "Discard Draft"
Know exactly what you're granting when you set up a role.
Delete Lease becomes Discard Draft on the company's permissions screen. You'll still find it in the same place, in the Lease group.
The Lease group on the company's permissions screen, with the permission now labeled Discard Draft
The old name made it sound as if the permission let users delete existing leases. In fact, it only controls discarding unfinished move-in and transfer drafts, and the new name says exactly that. You can now grant it without worrying you're giving someone the power to delete real leases.
Only the label has changed. Anyone who had the permission before still has it, and it works exactly as before.
"Amount" renamed to "Amount Owed" on Mark for Auction
Know exactly what you're entering when you list a unit for auction.
We've renamed the Amount field to Amount Owed in the Mark [Unit] for Auction drawer. You'll see it when you set up a manager's special auction (listed under Non-Lien Auctions) from a company unit's overview.
The Mark [Unit] for Auction drawer, with the renamed Amount Owed field next to Auction Tag Number
"Amount" on its own could mean anything: a starting bid, a sale price, or a fee. The new label makes it clear what the field is for, so there's no second-guessing when you list a unit.
Simpler Saved Report View in AI Talk to Your Data
A cleaner saved report view, with Explain Report right where you'll look for it.
Saved reports in Talk to Your Data get a cleaner view: the Reset button is gone, and Explain Report sits in the top-right corner.
Explain Report now sits in the top-right corner of every saved report and opens a plain-language explanation of how the report works
With fewer buttons competing for attention, the view is easier to scan, and Explain Report is easy to find whenever you want to ask about a report or change it.
Learn more → AI Talk to Your Data
Unread Counts on Email, SMS, and Notification Buttons
See how much is waiting for you, not just that something is.
Instead of a red dot, the email, SMS, and notification quick-action buttons in the header show how many unread items you have. You'll see the counts at both the Facility and Company level.
The email and notification buttons in the header show how many unread items are waiting.
A red dot told you something was new, but not how much. With a number, you can tell at a glance whether it's one message or a dozen, and decide whether it can wait until you finish what you're doing.
Learn more → Communication at the Facility Level and Communication at the Corporate Level
{{sig}} Tag Now Fills as "/s/" and the Tenant's Full Name
Signed documents that show exactly who signed them.
The {{sig}} tag now fills in as "/s/" followed by the tenant's full name, for example "/s/Jane Smith." Any document template that uses the tag picks this up automatically.
A signature line filled in as "/s/" followed by the tenant's full name
"/s/" followed by a name is a widely used format for electronic signatures, so the signature line on your documents now reads the way people expect.
Learn more → Signature Tags Reference
Lease Agreements are Easier to Tell Apart
Every lease agreement labeled with who, which unit, and when.
Generated lease agreements now include the date and time, the tenant's name, and the unit number. This applies everywhere lease agreements are generated:
The move-in flow, when you print an agreement for signing
Transfer flows
Tenant documents, including e-sign requests, bulk lease agreement requests, and single lease agreement requests
When you're handling several move-ins or transfers in a day, lease agreements can easily get mixed up. Now each one tells you exactly whose it is and when it was created, so the right agreement reaches the right tenant.
Export Your Active and Past Delinquencies
Take your delinquency lists anywhere you need them.
You can export the Active Delinquencies and Past Delinquencies lists as PDF, CSV, or XLSX files.
The Past Delinquencies list with the export options open, showing PDF, CSV, and XLSX
Whether you're sharing a collections update with an owner, handing a list to your accountant, or working through delinquencies in a spreadsheet, you can now take the list with you in the format that fits. Before this release, the lists stayed on screen, so getting them out of QuikStor meant copying them by hand.
Stored Goods on the Unit Overview
Know what's inside a unit and what it's worth without digging for it.
The Unit Overview tab shows the stored goods value and description. Hover over the Est. value of Stored Goods to see the full list of goods in the unit. These details come from what's entered during a move-in or transfer, and they appear only when they've been set.
Hover over the estimated value on the Unit Overview to see every item stored in the unit.
Whether you're talking a tenant through coverage, preparing a unit for auction, or answering a question about a claim, knowing what's in the unit and what it's worth is a hover away. Previously, finding those details meant going back to the move-in or transfer records.
Filter and Sort by Fee Categories
Find the right fee faster, even in a long list.
The List of All Fees screen has a new Category column, along with a Category section in the filter dropdown. Every fee's category (Fee, Tax, Delinquency, or Other) is now visible right in the list, and you can narrow the list to just the categories you need.
The new Category filter lets you narrow the list down
Every fee already had a category, but until now you could only see it by opening the fee. When you're reviewing taxes or checking delinquency fees across a long fee list, you can now go straight to the ones you need.
"No Coverage" Filter on Active Leases
Find every lease without coverage in one step.
The Coverage Plan filter on the Active Leases list has a new option: No coverage. Select it to see only the leases that have no coverage on file.
Choose "No coverage" in the Coverage Plan filter to see only the leases without coverage.
Every lease without coverage is a tenant without protection and a missed chance to offer your coverage plan. Without it, finding them meant scanning the whole Active Leases list row by row. Now it takes one filter, whether you're following up on the gaps shown in the new coverage widgets or planning a coverage outreach.
Role Search in the User Filter
Find the right role in a long list, without scrolling.
The role filter on the Users list has a new search box. Start typing a role name, and the list narrows to the matching roles.
Select a role in the role filter to jump straight to the one you're looking for
At companies with dozens of roles, finding the one you needed in the filter meant scrolling through a long dropdown. Now you can find it by name and get straight to the users who have it.
Caps Lock Warning on Password Fields
Catch Caps Lock before it costs you a login attempt.
Password fields in QuikStor and the Tenant Portal now let you know when Caps Lock is on, as soon as you start typing.
A warning appears inside the password field when Caps Lock is on
A password typed with Caps Lock on is a failed login, and a few of those can lead to a password reset nobody needed. The warning catches it before you submit, for your team and your tenants alike.
Accounting Method on the Corporate Level Facilities Screen
Check any facility's accounting method yourself, with no support ticket needed.
Each facility's accounting method, Cash or Accrual, is now visible on the Corporate-level List of All Facilities screen, both in the facilities list and on each facility's detail view.
The Corporate Facilities list shows whether each facility uses cash or accrual accounting
The facility's detail view shows which accounting method the facility uses
When you're reviewing journal entries, running accounting reports, or checking data in an accounting integration, you need to know which method a facility uses. Until now, the only way to find out was to ask QuikStor support. Now it's right there whenever you need it.
Heads up: The accounting method is shown for reference only. To change a facility's accounting method, contact our Support team.
Bug Fixes
Missing Fees no Longer Stop a Delinquency Template Assignment
When a delinquency template included fees that weren't assigned to the facility, assigning the template to a unit used to fail with an error. You had to leave the process, assign the fees on the Fee Assignment screen, and then come back and try again.
Now QuikStor asks, "These fees are not currently assigned to this facility. Would you like to assign them now?" Confirm, and the assignment carries on as normal.
Learn more → Assign a Delinquency Template to a Facility
Tenants See a Success Message after Deleting a Payment Method
When a tenant deleted a saved payment method from the Payment Methods page in the Tenant Portal, no message appeared to confirm it had worked. That left tenants unsure whether the payment method had actually been removed, and some may have tried again or contacted your office to check. Now a success message appears as soon as the payment method is deleted.
Lien Auctions Type Filter Returns both Auction Types
On the Lien Auctions page, checking both Manual and Online in the Type filter showed only manual auctions. Online auctions were left out without any warning, so the list looked complete when it wasn't. Now checking both types shows every auction, the same as leaving the filter empty.
Plus a number of smaller stability improvements. Thanks to everyone who reported issues.








































